more abut the restoration ... http://www.hoyetractor.com/1610D.htm
A quick recap...
The tractor was completely stripped down
The block was sleeved at a local machine shop
The crank was turned
all new pistons, rings, bearings, liners, gaskets, seals, oil pump, temp sender, & injectors were installed (he had a good parts source
) We have the invoices for all of the parts used.The body was completely removed and painted.
New clutch, pressure plate, throw out bearing, pilot bushing
New brakes, seals, etc.
A OSHA certified ROPS was installed along with the very nice sun shade
Our turf tire & wheel kit was installed (we are going to put NEW tires on it when it sells)
The tractor has been used about 6 hours so far and runs like a top.
You won't find another tractor like this.
$5,990
(no implements are included but we do have a used mower and blade available for an additional cost)